STOE has developed
a new type of diffractometer which is more flexible than any
existing system without any loss in performance.
STOE's STADI-MP combines the three most common diffractometer
configurations: Transmission geometry, Bragg-Brentano geometry
and a set-up for micro-diffraction.
STADI MP in Transmission / Debye-Scherrer
geometry with linear PSD
Micro-diffraction set-up with open Eulerian cradle, secondary
mono- chromator and scintillation counter
STADI MP in high resolution Bragg-Brentano geometry,
with evacuated beam guide and linear PSD
Transmission
/ Debye-Scherrer, flat plate and Bragg-Brentano mode All
geometries running with pure Kα1 radiation High
resolution yielding well-defined peak profiles Stress
and texture diffraction using an open Eulerian cradle Extensive
control and evaluation software WinXPOW Various
high / and low temperature attachments and sample changers Scintillation
counter, linear PSD and imaging plate detector
Transmission
/ Debye-Scherrer, flat plate and Bragg-Brentano mode
changers